PDA

View Full Version : Our Current Shop Machines


thekl0wn
04-07-2009, 04:37 PM
ALL ITEMS SOLD. 9/27/10
------------------------------------
$25.00
Rexon 13" Scroll Saw Model 5513A 120 Volt 1720 rpm
1" dust port & material blower

$25.00
10 Sanding Belts 8"x107" 24 grit 261F Three-mite

$25.00
Central Machinery Dovetail Jig

$30.00
Delta Mortising Attachment For Drill Press 17-924
With 5/16" & 3/8" mortising chisels

$400.00
True HVLP Sprayer American Turbine 1500
10.5 amps 52cfm @ 3/4" restriction 4 needlesets & Caps 0.5 &1.4
2 quart Pressure pot & 2.5 gallon pot with all hoses

$125.00
2- Hardwood Floor Nailers 1 Powernail Mod 145
1- Porta-nailer 401 & 2 boxes nails

$500.00
24" Double Drum Sander Grizzly G1066
220 volt 5 hp single phase 20-25 amp 5- extra belts

$450.00
15" Planer Grizzly G1021 with 3 extra sets of blades
2- hp single phase 16 fpm & 20 fpm

$1,000.00
15"Planer , 24"Sander & 1-hp Dust collector Combo
15" Grizzly 1021 Planer 220v with 3 extra sets blades
Grizzly 24" 2-Drum Sander 1066 220v 5-hp
1-hp dust collector with trash can cyclone

$1,700.00
Tri-Axial Backhoe Trailer with elec brakes
Trailer only 1,700
Trailer & Backhoe only 18,000
Backhoe Only 17,000

$17,000.00
Backhoe Mid 90s JCB 214 4 wheel drive Extendahoe
4,800 hrs diesel heated enclosed cab 12", 24" buckets & Forks
Needs kingpost pin & bushings
Backhoe Only 17,000
Trailer & Backhoe only 18,000

$300.00
10' Aluminum Brake for siding Tapco Windy Special 10' 6"

Pool Table $750.00

Prices are picked up. Possible delivery (additional fee) to Louisville or Cincinnati if on the correct weekend this Spring.

Don
04-08-2009, 11:27 AM
Sounds like it might be a good deal for someone. Put up some pictures if you get the chance.

dawjr

thekl0wn
04-08-2009, 08:11 PM
How they're setup now: http://www.woodworkingbuzz.com/forums/showthread.php?t=124

thekl0wn
04-29-2009, 12:32 PM
I've updated the list... There's a few non-shop items on there too. :eek: