PDA

View Full Version : New custom cabinet for my fish tank

mw2095
10-02-2007, 09:39 PM
Hey guys,
Just finished building my new cabinet for my 210gal saltwater tank, it's built to match the TV cabinet on the home page, check it out.
Thanks.:D

http://i239.photobucket.com/albums/ff308/mw2095/New%20Custom%20Fish%20Tank%20210gal/SD530821.jpg

http://i239.photobucket.com/albums/ff308/mw2095/New%20Custom%20Fish%20Tank%20210gal/SD530773.jpg

http://i239.photobucket.com/albums/ff308/mw2095/New%20Custom%20Fish%20Tank%20210gal/SD530795.jpg

http://i239.photobucket.com/albums/ff308/mw2095/New%20Custom%20Fish%20Tank%20210gal/SD530797.jpg
Don
10-02-2007, 09:50 PM
Hey, Marty. That's a real bad boy.

I edited your first picture so it would show on the post. If you click on edit your own post you will see that I changed the beginning and endings codes to * the guys can then follow your links to the other pictures if you want them to do it that way.

Where did you get the fluted columns or did you turn them yourself?

dawjr
Terry Mac
10-02-2007, 09:52 PM
Very nice job Marty, that's impressive.

The mill work adds a nice touch. What did you use for your finish?

A little curious how you're going to get the far side of that bookshelf though. ;)
William D Peirce
10-02-2007, 10:49 PM
really great looking cabnet...nice job on the raised panel doors bill
Bill
10-03-2007, 04:25 AM
really great looking cabnet...nice job on the raised panel doors bill

Hi Dad - Thanks for joining! Upload some pictures of all the great furniture you have made over the years.

- Bill
mw2095
10-03-2007, 10:09 AM
Hey Guys,
The wood appliques / onlays I ordered from Osborne Wood products,
See link below.
The finish is lacquer, I sprayed two coats of sealer and three coats of semi gloss clear, makes for a nice finish. And yes it looks a little close to my bookcase, but it's not as bad as it looks, there is 30" between the end of the cabinet to the face of my bookcase.
Thanks

http://www.osbornewood.com/
DIYer
10-12-2007, 03:14 PM
Very professional looking....Great job!!!
woodman43
12-13-2007, 01:48 PM
Sweet. Excellent work.
Joe C
12-14-2007, 02:55 AM
Excellent work....

http://www.craftandwoodworking.com
mw2095
12-14-2007, 03:45 PM
Hey Joe,
Thanks for the kind words::D
Marty